A narrow peel-and-stick rhinestone sticker strip, 3–20 mm wide, pre-sized so one piece is the material for one bangle. A buyer reference for the LOCACRYSTAL Bangle Diamond Sticker line.
A narrow rhinestone sticker strip on an adhesive film with a release liner, pre-sized so one piece is the material to wrap one bangle. Peel the liner, press it onto a plastic or metal bangle base — no sewing, no heat needed.
Four pattern families, each across several colour swatches — one of many specifications available.四种花型 · 每种多色款 · 多规格中的其中一组示例
Bangle Diamond Sticker is one of LOCACRYSTAL's main product lines — a narrow decorative strip that combines rhinestones (and any of twelve elements) with an optional 0.8 mm electroplated steel bead, all bonded onto an adhesive film with a release liner. The strip is cut to a bangle's length before it ships, so a single piece carries exactly the material a producer needs for one bangle.
The width runs 3–20 mm. The release liner is peeled and the strip is applied directly — this is a stick-on material, not a sew-on or a row-counted trim. All materials are AAA-grade, sourced from leading domestic Chinese suppliers, with high brilliance, strong bonding and a simple workflow.
A 3–20 mm range. Narrow widths sit alongside stacking bangles; wider widths run as the statement piece. (See page 05.)
3–20mm 范围。窄款配细叠戴款，宽款做主体亮条。（见第 05 页）
Pattern
花型
Arc-fan, diamond grid, diamond block, long chain, pearl mix, paved surface and more — chosen from the pattern library. (See page 06.)
弧形扇、菱格、菱块、长条菱形、珍珠混排、密排满铺等 —— 从花型库里选。（见第 06 页）
Material
材质
Twelve elements plus the optional 0.8 mm electroplated steel bead in gold, silver or colour-plated. (See page 07.)
12 种元素，外加可选 0.8mm 电镀钢珠（金 / 银 / 彩色）。（见第 07 页）
Common buyer misreads
Misread · 误读
Bangle Diamond Sticker is the same as Diamond Lace.
They are companion lines, not the same SKU. Diamond Lace is a rhinestone-only trim supplied by row count (2/3/4/5 rows), used across many base materials. Bangle Diamond Sticker is bangle-specific — narrower (3–20 mm), with an optional steel bead in the strip, and pre-sized so one piece equals one bangle.
Neither. Bangle Diamond Sticker is a peel-and-stick sticker strip. The adhesive film carries a release liner; peel it off and press the strip onto the bangle at room temperature. No needle, no iron, no heat-press.
No. On this line the unit is a bangle. One piece = enough material for one bangle, cut to length before shipping. Quote and reorder in pieces, not metres or rolls (see page 05).
Also known as · 别名
Bangle Mesh · Crystal Bangle Strip · Bracelet Mesh Tape · Bangle Rhinestone Strip · Self-Adhesive Bangle Strip · Stick-On Bangle Rhinestone · Bangle Bling Strip · Bangle Trim · 手镯水钻条 · 手镯亮条 · 手镯钻条
04 · Adhesive base · 背胶基底
The base layer
Peel-and-stick, with a release liner.
背胶基底 · 撕揭即贴 + 离型纸
Every Bangle Diamond Sticker strip sits on an adhesive film protected by a release liner. The liner stays on until the moment of application; peel it, and the strip presses onto the bangle base at room temperature.
A pressure-sensitive adhesive carries the stones and beads. Applied by hand at room temperature — no iron and no heat-press — so it suits finished plastic and metal bangle bases that should not see heat.压敏背胶承载钻与钢珠。室温手工贴合 —— 不用熨斗、不用热压机 —— 适合不能受热的成品塑料和金属手镯基底。
Release liner离型纸
A peel-off backing protects the adhesive in storage and transit. Keep it on until application; once removed, apply the same day so the adhesive holds at full tack.可撕离型纸在储存和运输中保护背胶。用之前一直保留；撕开后当天用完，保证背胶满粘力。
How it is applied
Clean and dry the bangle base — dust and oil on plastic or metal prevent full adhesion.
Peel the release liner from one end and start the strip flat at the seam.
Press around the bangle without stretching, keeping the strip flush to the curved surface, and press the closing edge down firmly.
把手镯基底擦干净擦干 —— 塑料或金属表面的灰尘和油渍会影响粘合。
从一端撕开离型纸，从接缝处起贴、保持平贴。
沿手镯按压一圈，不拉伸、贴服弧面，最后把收口边缘压实。
Always sample-test · 大货前规则
Test on the exact bangle base before bulk.
Bangle bases vary — the same adhesive holds well on one injection-molded plastic and can lift on a glossy coated surface. Run a bond test on the exact base the bulk order will use before releasing the PO to production.
Two numbers define how Bangle Diamond Sticker is ordered: the width sets the visual weight, and the unit is a bangle. Each strip is cut to a bangle's length before it ships, so a piece count is a bangle count.
Width sets the visual weight — the same pattern reads differently from a fine line to a statement band.宽度定视觉份量 · 同一花型从细线到主体亮带效果各异
06 · Pattern library · 花型库
The visual range
A pattern library, not a single look.
花型库 · 不止一种样子
On the same peel-and-stick base, the pattern sets the character of the bangle. These are the families ordered most across the Indian, MENA and LATAM markets — each available across several colour swatches.
Arc fan — concentric fanned rows for a layered, jewelry-like read.弧形扇款 · 同心扇形排布 · 层次饰品感Small diamond grid — an even tiled lattice for stacking bangles.小菱格款 · 均匀菱形网格 · 适合细叠戴款Large diamond block — bolder facets for a statement bangle.大菱格款 · 更大菱面 · 适合主体亮条Pearl × rhinestone mix — pearls and stones combined on one strip.珍珠水钻混排款 · 珍珠与钻在同一条上混排Silver paved surface — a fully tiled, edge-to-edge crystal face.银色密排满铺款 · 满铺到边的水钻面
Custom patterns · 定制花型
The library is a starting point, not the ceiling.
These families cover most placements, and pattern, colour swatch, stone size and bead plating can all be specified to a design under OEM / ODM. Send a reference or a sketch and the pattern is laid out for sampling.
Every Bangle Diamond Sticker strip is built from these twelve elements — the same material library that runs across the whole LOCACRYSTAL line. Four categories organise them by physical type.
Round glass — different from glass shaped rhinestone (B)
C4
Electroplated steel bead
电镀钢珠
Silver, gold, gunmetal, rose-gold finishes
D · Claw-set metalwork · 爪类 (2)
D1
Shaped claw setting
异形爪
Pre-formed claw shapes holding stones
D2
Claw chain
爪链
Continuous chain of claw-set stones
Signature option · 招牌选项
The 0.8 mm electroplated steel bead.
Bangle Diamond Sticker carries an optional 0.8 mm electroplated steel bead mixed into the strip alongside the rhinestones — available in gold, silver or colour-plating. Gold beads pair with brass and amber palettes for MENA formal-wear; silver beads match stainless cuffs; coloured beads run with saturated rhinestone palettes for LATAM party lines. The plating runs in-house, so the metal finish stays consistent across batches.
Hot-fix is a stand-alone stone material, not a process.
A common misread treats "hot-fix" as a backing option. It is not. Hot-fix (烫钻) is a stone material that ships with thermal adhesive already bonded to the back — normally flat-back. Flat-back rhinestone (A2) is bare; hot-fix (A3) is glue-ready. Different SKUs, different production lines.
From stone-and-bead selection to the final bangle-width cut, every step happens inside the Pujiang factory. Bead electroplating runs in-house, so the metal finish stays consistent across batches.
Elements, colours and the optional steel bead are drawn to the order spec and checked through incoming-material protocols.按订单规格选元素、配颜色与钢珠，经来料检验体系核验。
2 · Bead electroplating 钢珠电镀
The 0.8 mm steel beads are electroplated in-house to gold, silver or the ordered colour, locking the metal finish across batches.0.8mm 钢珠在自有产线电镀成金、银或指定色，跨批次金属色锁定。
3 · Pattern layout 排版对位
The pattern and stone pitch are laid out for the ordered width and design.按下单宽度与款式排定花型与排距。
4 · Adhesive bonding 胶膜复合
The stones and beads are bonded onto the adhesive film with its release liner.把钻与钢珠复合到带离型纸的背胶膜上。
5 · Strip slitting & QC 刀切 + 品控
The material is slit to width and cut to a bangle's length, checked to the same protocol, then bagged piece by piece.按宽度刀切、按一只手镯的长度裁切，按同一套标准检验，再逐片装袋。
Shared craft · 共享工艺
Built on the same rhinestone craft as Diamond Lace and Crystal Mesh.
Bangle Diamond Sticker shares its stone-setting and adhesive-lamination craft with Diamond Lace and Crystal Mesh — the same in-house engineering, here slit narrow and cut to bangle length with the steel-bead option added.
Bangle Diamond Sticker is the LOCACRYSTAL line most concentrated in regional bangle markets — India, MENA and LATAM — and steadily ordered by plastic and metal bracelet makers and accessory wholesalers worldwide.
A · Indian bangle market印度手镯 / 婚饰The largest single market — bangle workshops run it through wedding-jewelry seasons. 8 mm widths sit alongside stacking bangles; 12–15 mm widths run as the statement piece.
B · MENA & Gulf中东 / 海湾 · 礼服配饰Formal-wear bracelets and dress-jewelry sets — gold-electroplated bead options pair with crystal and amber rhinestones for the regional formal palette.
C · LATAM拉美 · 派对 / 节庆款Party and festival bracelets — coloured electroplated beads and saturated rhinestone palettes fit carnival and quinceañera demand.
D · Plastic bangle makers塑料手镯厂Stuck directly onto plastic bangle bases for mass-market lines. The adhesive holds against the curved injection-molded surface without lifting at the seam.
E · Metal cuff & bracelet金属手镯 / 宽臂镯Anchored onto metal cuffs and wide bracelets where bead plating matches the base — gold beads on brass, silver beads on stainless, colour beads on enameled cuffs.
F · Accessory wholesale配件批发常备A year-round catalogue SKU at LOCACRYSTAL wholesale partners — standard widths and bead colours ship through all seasons.
Loaded for shipment — standard widths and bead colours stocked for cross-region reorders.装箱准备 · 标准宽度与电镀色常备 · 供跨区域复购
10 · Storage · 储存与处理
Before, during, after
Storage & handling.
储存与处理
Bangle Diamond Sticker ships ready to apply. Three storage habits keep the adhesive film and the stone-and-bead face in the condition they left the factory in.
手镯钻贴条出厂即可贴。三个储存习惯能让背胶和钻珠面保持出厂状态。
Storage
Temperature: 15–28°C. Above 35°C, the pressure-sensitive adhesive softens — pieces can stick to one another.
Humidity: 40–60% RH. Above 70% RH, the adhesive can lose tack; below 30% RH, electrostatic build-up attracts dust.
Light: keep cartons closed. Silver-plated steel bead elements oxidise under prolonged UV exposure.
Liner: store with the release liner on — do not remove the liner until application.
温度：15–28°C。35°C 以上压敏背胶软化 —— 片与片之间容易自粘。
湿度：40–60% RH。70% RH 以上 · 背胶失粘风险；30% RH 以下 · 静电吸尘。
光照：纸箱保持封闭。电镀银钢珠元素长时间紫外暴露会氧化变色。
离型纸：保留离型纸存放 —— 用之前不要撕。
Before application
Wipe the bangle base clean and dry before bonding — dust and oil prevent full adhesion.
Once the liner is removed, apply within the same day so the adhesive holds at full tack.
Do not stretch the strip while applying — keep it flush to the curved surface.
贴合前把手镯基底擦干净擦干 —— 灰尘和油渍会直接影响粘合。
离型纸撕开后当天用完，保证背胶满粘力。
贴合时不要拉伸条带，贴服弧面。
End-consumer care
Wipe the finished bangle clean; avoid soaking or prolonged water contact.
Keep away from perfume, alcohol and solvents, which can attack the adhesive and plating.
Store finished bangles separated so the stone faces do not rub against one another.
成品手镯擦拭清洁；避免浸泡或长时间接触水。
远离香水、酒精和溶剂 —— 会侵蚀背胶和电镀。
成品手镯分开存放，避免钻面互相摩擦。
11 · Troubleshoot · 常见问题
Six failures we see most
Common problems & fixes.
常见问题与处理
Six failure patterns that account for the majority of buyer support tickets — each with the cause behind it and the production-floor fix.
买家支持工单里出现频率最高的 6 种失效模式，每一条都附上根因和产线处理方案。
The strip lifts at the seam after wrapping.
绕贴后接缝处翘起
Cause: bangle base not clean/dry, or the strip was stretched while wrapping.
根因：手镯基底没擦干净/干燥，或绕贴时拉伸了条带。
Fix: wipe the base clean and dry; wrap flat without tension; press the closing edge down firmly.
处理：基底擦净擦干；不拉伸平贴；收口边缘压实。
The adhesive does not hold on a glossy base.
亮面基底上贴不牢
Cause: a glossy coated or oily plastic/metal surface gives the adhesive little to grip.
根因：亮面涂层或带油的塑料/金属表面 · 背胶抓不住。
Fix: degrease and lightly key the surface; run a bond test on the exact base before bulk.
处理：去油、轻打磨表面；大货前用同款基底跑粘合测试。
Pieces stick to each other in storage.
储存中片与片自粘
Cause: high temperature, or the release liner was removed too early.
根因：温度过高，或离型纸过早撕掉。
Fix: store below 28°C with the liner on; keep the liner until the moment of application.
处理：28°C 以下、保留离型纸存放；贴合前才撕离型纸。
Colour variation between pieces.
不同片之间颜色不一致
Cause: stones or beads drawn from different production batches.
根因：不同生产批次的钻或钢珠混入同一订单。
Fix: on reorders, specify "same batch as previous PO" in writing; on new orders, request a colour-cluster confirmation sample.
处理：复购时书面注明"沿用上批次"；新单先要颜色一致性样品确认。
Steel bead elements darken in storage.
电镀钢珠在储存中变暗
Cause: silver plating oxidises under air, moisture or UV.
根因：银电镀在空气、湿气、UV 下氧化。
Fix: store in sealed mylar with desiccant; for long shelf-life, specify gold or gunmetal plating.
处理：密封 mylar 袋 + 干燥剂；长期储存改指定金或枪色电镀。
Width or length looks different from the sample.
大货宽度或长度与样品不同
Cause: sample and bulk PO did not specify the same width and bangle size.
根因：样品和大货 PO 上的宽度与手镯尺寸不一致。
Fix: reference width, pattern and bangle size on every PO. "12 mm · gold bead · 65 mm bangle" is unambiguous; "bangle strip" alone is not.
处理：每张 PO 必须写宽度、花型和手镯尺寸。"12mm · 金珠 · 65mm 手镯"无歧义；只写"手镯条"不够。
12 · Capability · 工厂能力
Behind the catalog
Production capability.
工厂能力
A regional-market line from one factory in Pujiang, Zhejiang — seventeen years of rhinestone craft, eight thousand square metres under one roof, sized at 100,000 pieces per day.
Labelled export carton — standard widths and bead colours ship year-round.出货塑封箱 · 标准宽度与电镀色全年备货
100,000 / day
日产 10 万条
The line runs at 100,000 pieces per day, sized to hold capacity through the Indian wedding-jewelry peak season without slowing on consolidated container orders.
日产能 10 万条 —— 按印度婚饰季稳产需求设计，备柜时订单堆上来产能不会卡。
8,000 m²
自有厂房
All eight LOCA lines under one roof. Buyers who order Bangle Diamond Sticker with Diamond Lace or Crystal Mesh ship one container from a single address.
8 条产品线集中在同一栋厂房。手镯钻贴条 + 水钻条 + 水钻网片一柜混发，发货地址同一个。
17 years
17 年工艺沉淀
Bead-plating tolerance, adhesive density, strip slitting accuracy — every protocol behind the strip has been adjusted, tested and locked in over more than a decade.
电镀公差、胶膜密度、刀切精度 —— 每项都是十几年磨出来的标准。
Since 2009
2009 年起
LOCACRYSTAL has produced rhinestone accessory material since 2009 — the same internal protocols, season after season.
乐卡 2009 年起做钻类辅料 —— 同一套内部标准，一季接一季。
Quality philosophy · 品质哲学
Same protocol. Every piece. Every shipment.
Each Bangle Diamond Sticker batch — regardless of customer, season or volume — runs through the same internal protocols. Bead alignment, adhesive strength and strip width are locked to internal standards, so Sample Round 1 and Bulk Run 5 look the same on the bangle.
Identify the width, pattern and stone that fit your bangle program — then send a brief, and we'll send back physical sample pieces within the standard sampling lead-time. Trial orders start from USD 500.
选定宽度、花型与钻材，把简报发给我们，按标准打样周期把实物样片寄到你手上。试单 500 美元起。
What to include in your sample brief
Width — anywhere in the 3–20 mm range.
Pattern — arc fan, diamond grid, diamond block, long chain, pearl mix, paved surface, or a reference image.
Stone / element — crystal pointed-back, resin, glass shaped, etc.
Steel bead — gold / silver / colour-plated, or none.
Bangle base & size — what you'll stick it to: "injection-molded plastic, 65 mm", "brass cuff".
