Eight Product Lines.

Flexible rhinestone mesh — used by shoe, garment, bracelet and wholesale buyers to add stones to any base material.

柔性水钻胶网片 —— 鞋厂、服装厂、手镯厂、批发商用它给各种基材添加水钻元素。

• Format24 × 40 cm sheet · 25 m roll · up to 50 cm width
• StonesSS2.5 — SS12
• MaterialsRhinestone · resin · ceramic · multi-element mix
• UseGarment · footwear · bangle · fashion accessories

Decorative rhinestone trim — built from a Crystal Mesh roll bonded with fabric and a selectable inner core (cotton, EVA, PVC, PU, TPU).

由水钻胶网片复合布底 + 内层（棉 / EVA / PVC / PU / TPU 任选）做成的装饰水钻抽条。

• Format4 / 5 / 6 / 8 rows · 4–20 mm wide
• Capacity150,000 m / day across 10 dedicated machines
• ConstructionFabric back + selectable inner core
• UseFootwear · accessories · trims

Slim flexible rhinestone trim — 2 to 5 rows of stones on a 0.5 mm flexible adhesive base for garment and accessory decoration.

窄幅柔性水钻装饰条 —— 2 至 5 排水钻，0.5 mm 厚柔性基底，用于服装与辅料装饰。

• Format2 / 3 / 4 / 5 rows · 0.5 mm thick
• ConstructionCrystal Mesh + adhesive film, die-cut
• MixMulti-element decorative layout
• UseGarment · footwear · bangle · accessories

Narrow rhinestone sticker strip — built for bangle and bracelet decoration, with optional 0.8 mm electroplated steel beads.

窄幅水钻贴条 —— 专为手镯与手链装饰设计，可加 0.8 mm 电镀钢珠装饰元素。

• Width3 — 20 mm
• Capacity100,000 strips / day
• MixMulti-element · 0.8 mm electroplated beads
• MarketsIndia · MENA · LATAM · global bangle producers

3D multi-layer rhinestone motifs — hand-set, the most craft-intensive product line in the LOCACRYSTAL system.

3D 立体多层水钻花型 —— 手工嵌钻，乐卡产品体系里工艺最复杂的一条。

• Build3D multi-layer construction
• ProcessLaser cut + 3D heat-press + hand-set + finishing
• Team50+ handcraft team
• UseBridal · garment · footwear · jewelry

Die-cut, backless rhinestone motif patches — engineered for shoe factory lines, heat-press or peel-and-stick.

按图案刀切的无布底水钻装饰贴片 —— 专为鞋厂产线设计，热压或揭撕粘贴皆可。

• Motif2 — 20 cm die-cut shapes
• BaseHot-melt OR 513 double-sided sticker
• SubstrateFabric · leather · PVC · rubber · TPU
• UseSandals · slippers · sneakers · platforms

Finished shoe vamps — cold-hot press + RF welding, ready for shoe factories to attach to soles.

鞋面成品 —— 冷热压 + 高周波焊接，鞋厂收到就装鞋底，跳过自家鞋面打版。

• ProcessCold-hot press + RF welding
• ConstructionFabric back + selectable inner core (cotton / EVA / PVC / PU / TPU)
• Target 202620,000 pairs / day
• UseShoe factory final assembly

PVC decorative strip — independent extrusion line, separate from the rhinestone system. For shoe and apparel decoration.

PVC 装饰亮条 —— 独立挤出体系，与水钻产品线完全分开。用于鞋类与服装装饰。

• Build5 independent PVC extrusion lines
• Format1 / 4 / 10 / 14 row counts
• Target 202650,000 m / day
• UseSandal & slipper trim · garment