A rhinestone diamond patch is a pre-made motif built from a piece of artwork: rhinestones arranged into a shaped appliqué with adhesive backing, ready to press and, on heavier goods, sew. For a brand, that artwork is usually a logo, a set of letters or a monogram. The job is to keep the stone version faithful to the drawing the brand already owns.
水钻钻贴是照一份图稿做出来的成型图案：水钻排成有形状的贴花，背面带胶，可以直接烫，厚一点的货还能加缝。对品牌来说，那份图稿通常就是一个 logo、一组字母或一个字母花押。要做的，是让钻版忠实于品牌本来就有的那张图。
From Logo File to Stone Layout
从 logo 文件到排钻图
A logo drawn for print is solid: clean edges, thin strokes, exact corners. Stones are round and have a minimum size, so the translation is not one-to-one. A good stone layout keeps the silhouette and the proportions the eye recognises, then chooses stone sizes that fill the strokes without crowding. Thin serifs and tight counters are where a logo lives or dies in rhinestones, so those get resolved first.
为印刷画的 logo 是实心的：边缘干净、笔画细、转角精确。钻是圆的，还有最小尺寸，所以转换不是一比一的。一张好的排钻图，保住眼睛能认出的轮廓和比例，再选合适的钻号把笔画填满又不挤。细的衷线和收得很紧的字腔，是 logo 做成水钻时成败的关键，所以这些先解决。
Send vector artwork when you can. A clean outline lets the layout follow the true edge instead of guessing from a low-resolution image. Where a mark has fine detail that no stone can hold, the sample stage is where we agree what to simplify, so the brand signs off before production rather than after.
尽量发矢量图稿。干净的轮廓能让排钻顺着真实的边走，而不是从低清图上猜。标志里有些细节任何钻都撚不住，那就在打样阶段商定哪里简化，让品牌在投产前签字，而不是投产后。
Sampling for Fidelity
为还原度打样
Fidelity is the whole point of a branded patch. A wordmark that is a little off is worse than no wordmark, because customers know the real one. The sample answers three questions: does the silhouette match, are the proportions right, and does the mark stay legible at the size it will actually run. A logo that reads clean at 90mm on a bag panel can turn to mush at 45mm on a cap, so sample at the true finished size, not larger.
还原度是品牌钻贴的全部意义。一个略微走样的标准字，比没有标准字更糟，因为顾客认得真的那个。样品回答三个问题：轮廓对不对、比例正不正、在真正会做的尺寸上标志还清不清楚。一个在包片上做到 90mm 读得干净的 logo，缩到帽子上的 45mm 可能就糊成一团，所以要按真实成品尺寸打样，别放大。
Brand colour matters as much as shape. If the mark has a signature colour, we match stone colour to it and check the match under warm and cool light, because a stone that reads right indoors can shift outside. One approval round against the real garment colour keeps the run on brand.
品牌色和形状一样重要。标志若有招牌色，我们用钻色去配，并在暖光冷光下都核一遍，因为室内看对的钻到室外会变。拿真实衣料颜色签一轮，能让整批货不跑品牌。
Placement on Cap Fronts and Bag Panels
帽子前片与包身上的摆位
A cap front is small and slightly curved. Centre the patch on the front panel, set high enough to clear the brim seam and sized to sit within the panel rather than crossing the side seams. The crown curves, so a patch built to ease over that curve stays flat instead of tenting at the middle. On a fitted or structured cap the front panel is firm, which holds the mark still.
帽子前片小而略带弧度。把钻贴居中放在前片，位置够高避开帽檐缝，尺寸落在片内不跨侧缝。帽冠是弯的，所以做成能顺着弧面服贴的钻贴，才会平贴而不是中间拱起。有骨架的硬挺帽子前片结实，能把标志定住。
On a tote or bag panel the surface is flat and generous. Centre the mark on the front face, or set it lower toward one corner for a quieter placement. Keep the patch off fold lines and away from where a strap or handle attaches, since those points flex and carry load. On hoodies, the left chest and the centre back are the two placements customers read as branded rather than decorative.
托特包或包身的面平整又宽裕。把标志居中放在正面，或往一个角偏下放，做低调些的摆位。钻贴要避开折线，也远离肩带或提手的接点，因为这些点会屈折、要受力。卫衣上，左胸和正后背这两个位置，顾客会看成是品牌的而非装饰的。
Wear, Hold and Order Notes
耐用、固定与下单要点
Caps and bags get handled hard: stuffed into luggage, thrown on car seats, worn in the rain. The adhesive backing bonds the whole patch in one press for a flat, clean start. On items that flex or get washed, sew the border down for a second line of hold. Caps usually press only; canvas bags and hoodies that go through a wash benefit from the added stitch. Tell us the end use up front, because a giveaway cap and a retail hoodie call for different backing and hold.
帽子和包用得很糙：塞进行李、扔到车座、雨里戴。背胶一次热压把整片贴合，起步平整干净。会屈折或要下水洗的货，沿边缝一圈多一道固定。帽子通常只热压；帆布包和要过水的卫衣，加缝那道更保险。下单时先说清最终用途，因为赠品帽和零售卫衣，用的背胶和固定方式不一样。
Order the patch family together so one brand mark stays identical across caps, bags and hoodies. For promotional or private-label runs, lock the artwork and the finished size on an approved sample, then reorder against that reference. Hold a small reserve for replacements and late additions to the run.
整组钻贴一起订，让同一个品牌标志在帽子、包和卫衣上完全一致。做促销或贴牌批量时，在签好的样品上锁定图稿和成品尺寸，再照这个基准返单。留一点备用，应对替换和批量的临时追加。
Pujiang LOCACRYSTAL has made rhinestone accessories since 2009, running an 8,000㎡ own factory with 80-plus machines, a 50-plus hand-finishing team and 100-plus upstream suppliers. We turn brand artwork into rhinestone diamond patches for caps, bags and apparel. To sample your mark in stones, reach us on WhatsApp at +86 186 0677 6000 or [email protected]. Seventeen Years. One Source for Rhinestone Accessories.
浦江乐卡从 2009 年起做水钻辅料，8,000㎡ 自有厂房、80 多台机器、50 多人手工组、100 多家上游供应商。我们把品牌图稿做成用在帽子、包和服装上的水钻钻贴。想把你的标志打成钻样，可通过 WhatsApp +86 186 0677 6000 或 [email protected] 联系我们。十七年，一站式采购水钻辅料。