01 · The Core Relationship
Row count is the primary dimension variable.
排数是决定宽度的核心变量
Diamond Rope is built from a fabric-backed base with a selectable inner core — the core determines body and rigidity, but row count determines finished width. Each row adds one lateral sequence of rhinestones across the trim, so width scales in direct proportion to row count and to the size of the stone setting selected. A single-row rope is a fine accent line; a ten-row or higher rope reads as a bold, structural band. Buyers often fix on a target finished width first, then work back to row count once stone size is confirmed. That sequence matters: reversing it leads to spec mismatches at the sampling stage.
水钻抽条由带布底的基材与可选内芯构成——内芯决定硬度与挺括度，排数决定成品宽度。每增加一排，即在横向增加一列水钻，因此宽度与排数、所选石码正比例增长。单排抽条是细腻的装饰线条，十排及以上则呈现出醒目的结构感宽边。采购商通常先确定目标成品宽度，再根据石码反推排数。这个顺序很关键：若顺序颠倒，往往在打样阶段产生规格偏差。
02 · Stone Size and Pitch
The stone size multiplies every row.
石码是排数宽度的乘数
Two trims can share the same row count yet arrive at very different finished widths if their rhinestone sizes differ. A five-row rope set with SS10 stones sits noticeably narrower than a five-row rope set with SS20 stones. The practical implication: always specify row count and stone size together. Quoting one without the other leaves the width undefined. For decorative elements, Diamond Rope can carry pointed-back rhinestones, flat-back rhinestones, hot-fix rhinestones, resin rhinestones, ceramic rhinestones, or glass shaped rhinestones — each with its own typical set diameter. Changing stone type within the same row count will shift the width, and may also shift the surface profile from flat to slightly domed.
两款抽条即便排数相同，若水钻石码不同，成品宽度也会有明显差异。同为五排，SS10水钻的成品明显窄于SS20水钻的成品。实际操作意义在于：必须同时注明排数与石码，缺少任何一项，宽度便无从确定。水钻抽条可搭配尖底钻、平底钻、热熔钻、树脂钻、陶瓷钻或玻璃异形钻等多种装饰元素——每种石款都有其常用爪径。在相同排数下更换石款，会改变成品宽度，也可能使表面从平整变为略微拱起。
03 · End-Use Fit by Row Range
Match the row range to the application before sampling.
打样前先按应用场景匹配排数区间
Across LOCACRYSTAL's order history, end uses cluster around recognizable row ranges. Shoe trims and sandal straps favour narrower configurations — typically one to five rows — where the rope must follow a curved last and add sparkle without adding visible bulk. Garment cuffs and neckline borders tend to call for mid-range counts, roughly four to eight rows, where the trim reads clearly against fabric without stiffening the drape. Bag handles, belt centres, and statement waistbands push into eight rows and beyond, where the trim is expected to carry visual weight as a design feature, not a supporting accent. These are orientation ranges, not rigid rules; a shoe factory working a luxury platform heel may specify a wider count than a garment maker trimming a light chiffon.
根据乐卡的历史订单，不同终端用途往往集中在可辨识的排数区间。鞋类装饰和凉鞋带倾向于较窄配置——通常一到五排——抽条需贴合弧形鞋楦，增添光彩而不增加可见厚度。服装袖口和领口滚边一般采用中等排数，约四到八排，装饰效果清晰，又不影响面料垂感。包带中心、腰带正面和设计感腰封则进入八排及以上区间，此时抽条承载的是视觉重量，是设计主角而非配角。以上是参考区间，并非硬性规则；制作奢华厚底鞋的鞋厂，其选择的排数可能宽于为薄雪纺面料走边的服装厂。
Worth knowing
Inner core selection affects drape at every row count.
Diamond Rope's selectable inner core governs stiffness independent of width. A high-row-count rope on a soft core can still drape fluidly; a low-row-count rope on a firm core will hold its shape on a structured edge. Specify both row count and core type when requesting samples — they are separate decisions with separate effects.
04 · Diamond Lace as an Adjacent Option
When a wider format needs a flexible adhesive base instead.
当更宽幅面需要柔性胶底时，考虑水钻蕾丝
Buyers specifying wide decorative trims sometimes reach a point where Diamond Rope and Diamond Lace overlap in apparent width but diverge sharply in construction and behaviour. Diamond Lace sits in the flexible adhesive base group: it bonds directly to a surface without sewing, making it the preferred choice for rigid substrates or applications where needle penetration is not possible. Diamond Rope, with its fabric back and inner core, is sewn or wrapped — it works where the trim must travel around an edge, loop through hardware, or sustain repeated flex. Knowing which base structure the application demands narrows the shortlist before width and row count are even discussed.
在采购较宽装饰料时，买家有时会发现水钻抽条与水钻蕾丝在视觉宽度上接近，但结构与性能截然不同。水钻蕾丝属于柔性胶底产品组，可直接粘贴于材料表面，无需缝制，适用于硬质基材或无法走针的工艺场景。水钻抽条带布底和内芯，以缝合或缠绕方式固定，适用于需要绕边走、穿五金件或承受反复弯折的场合。在讨论宽度与排数之前，先明确应用场景所要求的底材结构，才能真正缩小选型范围。
05 · Sampling and Ordering Protocol
Confirm three variables before requesting a sample.
提样前确认三项参数
A complete specification for Diamond Rope requires three fixed variables: row count, stone size, and inner core type. Without all three, a sample may return at the right visual width but wrong stiffness — or the right stiffness but wrong width — requiring an additional round. LOCACRYSTAL supports OEM and ODM configurations across its 8 product lines, produced at an 8,000 m² owned factory in Pujiang and Yiwu, Zhejiang, with 80+ machines and a 50+ person handcraft team. Stone choice is wide: buyers can specify rhinestone type, bead type, or glass shaped rhinestone depending on the surface effect required. Submitting all three rope variables upfront compresses sample lead time and reduces revision rounds — a practical advantage when working against a seasonal development calendar.
一份完整的水钻抽条规格单需固定三项参数：排数、石码和内芯类型。缺少任何一项，打回的样品可能宽度对但硬度不符，或硬度对但宽度偏差，需要额外一轮返样。乐卡在浙江浦江和义乌设有8,000平方米自有工厂，配备80台以上设备及50余人的手工团队，支持8条产品线的OEM和ODM定制。可选石款丰富：买家可按所需表面效果指定水钻类型、珠类或玻璃异形钻。提样时一次性提交三项抽条参数，可有效压缩打样周期，减少修改轮次——对于按季节开发日历推进的买家而言，这是切实的效率优势。